Power Press Machine
 
 
Rope making machine,High speed needle loom,Needle looms,Drill machine,Pillar drill machine,Radial drill machine,Rope making machine,High speed needle loom,Needle looms,Drill machine,Pillar drill machine,Radial drill machine          Rope making machine,High speed needle loom,Needle looms,Drill machine,Pillar drill machine,Radial drill machine,Rope making machine,High speed needle loom,Needle looms,Drill machine,Pillar drill machine,Radial drill machine

STEEL BODY(20 TONES)                  C.I.BODY(40 TONES)
 
 FRAME  THE FRAME IS OF STEEL CONTRACTION AND THEIR HEAVY CROSS
 SECTION AND RIGID DESIGN ASSURE MINIMUM DEFLECTION AND
 ACCURATE ALINMENT. C.I. LEGS WILL BE SUPPLIED UP TO 30 T PRESSES.
 CRANKSHAFT  CRANKSHAFT MATERIALS ARE OF SPECIAL ALLOY STEEL TO WITHSTAND
 THE EFFECTIVE LOAD FITTED IN BUSHER WITH HIGH ACCURACY.
 CLUTCH  THE CLUTCH IS PROVIDED OF PIN/ROLLING KEY TYPE ALSO IT IS RIGID
 AND WELL SUPPORTED FOR THE MASS PRODUCTION CLUTCH CAN GIVE
 CONTINUOUS STROKE.
 GEARS  THE GEARS ARE MADE OF CAST STEEL OR FABRICATED AND IT TEETH
 ARE GENERATED BY HOBBING
 FLYWHEEL  THE FLYWHEEL ARE OF HIGH GRADE CAST IRON AND BALANCED FOR
 STORING AND RELEASING ADEQUATE ENERGY FOR THE PRESSING
 OPERATIONS.
 LUBRICATION  AN ACCURATE LUBRICATION SYSTEM HAS BEEN PROVED FOR
 LUBRICATION THE SLIDING SURFACES AND MOVING PARTS.

SPECIFICATIONS FOR "C TYPE" POWER PRESSES
 
Description 3 tons 5 tons 10 tons 15 tons 20 tons 30 tons 40 tons 50 tons 75 tons 100 tons 150 tons
Cranks Shaft Dia. 38 51 60 70 76 83 89 95 114 127 152
Stroke Adjustment 2-19 6-25 6-25 10-38 13-51 13-63 13-75 13-76 13-102 13-114 13-127
Hole in Ram 19 25 25.4 32 32 38 38 38 45 51 51
Hole in Bed 51 63 76 80 83 89 89 102 127 127 152
Length and width of Bed 255x152 305x178 356x203 432x254 457x305 508x355 558x381 660x406 711x508 813x558 914x610
Dist. Bed to Ram 140 155 180 205 230 266 275 290 330 381 410
Fly Wheel Dia. 330 405 435 500 550 660 737 810 910 1016 1118
Stroke per minute 85 85 75 75 60 60 55 55 50 40 30
H.P. Required 0.5 0.5 1 1.5 2 3 4 5 7.5 10 15
Floor to top of Bed 520 690 730 740 815 825 865 900 915 915 915
Weight Approx 200 300 450 700 900 1750 1750 2350 3500 5000 6000

SPECIFICATIONS FOR "PILLAR TYPE" POWER PRESSES

Description 10 tons 15 tons 20 tons 30 tons 50 tons 75 tons 100 tons 150 tons
Cranks Shaft Dia. 60 70 76 83 95 114 127 152
Stroke Adjustment 6-25 10-38 13-51 13-63 13-76 13-102 13-114 13-127
Hole in Ram 25.4 32 32 38 38 45 51 51
Hole in Bed 76 80 83 89 102 127 127 152
Length and width of Bed 355x406 406x457 457x508 508x559 560x610 610x762 660x813 711x914
Dist. Bed to Ram 180 205 230 266 290 330 381 410
Fly Wheel Dia. 435 500 550 660 810 910 1016 1118
Stroke per minute 75 75 60 60 55 50 40 30
H.P. Required 1 1.5 2 3 5 7.5 10 15
Floor to top of Bed 730 740 815 825 900 915 915 915
Weight Approx 400 600 800 1000 2000 3100 4600 5650
 

Rope Making Machine   |  Rope Machine Accessories  |  High Speed Needle Loom |
Power Press |  Drill Machine

Home   |   Company Profile   |    Products    |   Quality Control    |   Contact Us    |    Inquiry Form
     Monofilament Extrusion Plants
     P.P. / HDPE Tape Extrusion Plants
     Waste Recycling Extrusion Plants
    Rope Making Machines
    Rope Machine Accessories
    Needle Loom
    Power Press
    Drill Machine
 
 

All Rights Reserved by Shaktivijay Engineering Works.                                                                                Design & Developed by Raghukul Technologies.